Differences

This shows you the differences between two versions of the page.

--- hardware:printers:3d_printers [2026/07/08 03:15] – update qidi/prusa after some troubleshooting enzi
+++ hardware:printers:3d_printers [2026/07/22 02:03] (current) – upgrade tables + more prusa info + more qidi info enzi
@@ Line 5: / Line 5: @@
 ## Prusa i3 MK3 (@???)
-- owner: @???
+- owner: @hadn69
 - status: out of service
-- print method: octoprint
+- print method: octoprint (octoprint is currently oos)
 ### Specs
+| spec | stat |
+|:-------------|------------------:|
 | Build Volume | 250 x 210 x 200mm |
 | Max Nozzle Temperature | 300° C  |
-| Max Bed Temperature | 100° C  |
+| Max Bed Temperature    | 100° C  |
 last checked 7/7/26 needs nozzle/bed calibration, should be otherwise good to go?
@@ Line 26: / Line 28: @@
 - owner: @lily
 - status: **in service**
-- print method: (print method)
+- print method: Studio PC (bambuslicer)
-Cool Description
 ***
@@ Line 42: / Line 45: @@
 Todo (as of 7/7/26):
 - lubricate lead screws
+### Printing
+- On any PC, fire up [orcaslicer](https://www.orcaslicer.com)
+- Load up the Q1 pro preset with the **0.6 nozzle** (as of 7/21)
+- Slice, export to an exfat/fat32 formatted drive (it's not picky)
+- Plug in at the top right
+- Pick your print on the display!
+### Notes
+- Filament loader needs to be changed at some point (it's jammed against the rack right now)
+- Have experienced some speghettification (as of 7/21) so the bed might need a wash
+- The rails are very thirsty for lube...
 ### Specs
+| spec | stat |
+|:-------------|------------------:|
 | Build Volume | 245 x 245 x 245mm |
 | Max Nozzle Temperature | 370° C  |
-| Max Bed Temperature | 120° C  |
+| Max Bed Temperature    | 120° C  |
-| Active Chamber Heating | 60° C  |
+| Active Chamber Heating |  60° C  |
-| Build Plate | Textured PEI  |
+| Build Plate            | Textured PEI |
-***
+***