Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| hardware:printers:3d_printers [2026/07/08 03:15] – update qidi/prusa after some troubleshooting enzi | hardware:printers:3d_printers [2026/08/10 00:00] (current) – Added note for P2S issues with OrcaSlicer Jay | ||
|---|---|---|---|
| Line 5: | Line 5: | ||
| ## Prusa i3 MK3 (@???) | ## Prusa i3 MK3 (@???) | ||
| - | - owner: @??? | + | - owner: @hadn69 |
| - status: out of service | - status: out of service | ||
| - | - print method: octoprint | + | - print method: octoprint |
| ### Specs | ### Specs | ||
| + | | spec | stat | | ||
| + | |: | ||
| | Build Volume | 250 x 210 x 200mm | | | Build Volume | 250 x 210 x 200mm | | ||
| | Max Nozzle Temperature | 300° C | | | Max Nozzle Temperature | 300° C | | ||
| - | | Max Bed Temperature | 100° C | | + | | Max Bed Temperature |
| last checked 7/7/26 needs nozzle/bed calibration, | last checked 7/7/26 needs nozzle/bed calibration, | ||
| Line 26: | Line 28: | ||
| - owner: @lily | - owner: @lily | ||
| - status: **in service** | - status: **in service** | ||
| - | - print method: (print method) | + | - print method: |
| + | - Currently has some issue starting prints directly from OrcaSlicer, default to BambuSlicer at this time. | ||
| + | |||
| + | ### Printing | ||
| + | |||
| + | - Open BambuSlicer ~~(Or OrcaSlicer)~~ | ||
| + | - Install Network Plugin, if prompted | ||
| + | - Navigate to ' | ||
| + | - Select 'No Printer +' and select ' | ||
| + | - When prompted, enter the Access Code, which can be found via the control panel of the printer on the main settings page. | ||
| + | - Return to the ' | ||
| + | - Bed type: Textured PEI | ||
| + | - Nozzle: 0.4mm (Hardened Steel) | ||
| + | - Flow: Standard | ||
| + | - Slice and Print! | ||
| + | |||
| + | ### Specs | ||
| + | |||
| + | | spec | stat | | ||
| + | |: | ||
| + | | Build Volume | 256 x 256 x 256mm | | ||
| + | | Max Nozzle Temperature | 300° C | | ||
| + | | Max Bed Temperature | ||
| + | | Active Chamber Heating | N/A | | ||
| + | | Build Plate | Textured PEI | | ||
| + | | Nozzle Size (Type) | ||
| - | Cool Description | ||
| *** | *** | ||
| Line 42: | Line 68: | ||
| Todo (as of 7/7/26): | Todo (as of 7/7/26): | ||
| - lubricate lead screws | - lubricate lead screws | ||
| + | |||
| + | ### Printing | ||
| + | |||
| + | - On any PC, fire up [orcaslicer](https:// | ||
| + | - Load up the Q1 pro preset with the **0.6 nozzle** (as of 7/21) | ||
| + | - Slice, export to an exfat/fat32 formatted drive (it's not picky) | ||
| + | - Plug in at the top right | ||
| + | - Pick your print on the display! | ||
| + | |||
| + | ### Notes | ||
| + | |||
| + | - Filament loader needs to be changed at some point (it's jammed against the rack right now) | ||
| + | - Have experienced some speghettification (as of 7/21) so the bed might need a wash | ||
| + | - The rails are very thirsty for lube... | ||
| ### Specs | ### Specs | ||
| + | | spec | stat | | ||
| + | |: | ||
| | Build Volume | 245 x 245 x 245mm | | | Build Volume | 245 x 245 x 245mm | | ||
| | Max Nozzle Temperature | 370° C | | | Max Nozzle Temperature | 370° C | | ||
| - | | Max Bed Temperature | 120° C | | + | | Max Bed Temperature |
| - | | Active Chamber Heating | 60° C | | + | | Active Chamber Heating | 60° C | |
| - | | Build Plate | Textured PEI | | + | | Build Plate | Textured PEI | |
| + | | Nozzle Size (Type) | ||
| - | *** | ||
| + | *** | ||