This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. # 3D Printers *** ## Prusa i3 MK3 (@???) - owner: @hadn69 - status: out of service - print method: octoprint (octoprint is currently oos) ### Specs | spec | stat | |:-------------|------------------:| | Build Volume | 250 x 210 x 200mm | | Max Nozzle Temperature | 300° C | | Max Bed Temperature | 100° C | last checked 7/7/26 needs nozzle/bed calibration, should be otherwise good to go? *** ## Bambu P2S (@lily) - owner: @lily - status: **in service** - print method: Studio PC (BambuSlicer), any PC (~~Orca~~/BambuSlicer) - Currently has some issue starting prints directly from OrcaSlicer, default to BambuSlicer at this time. ### Printing - Open BambuSlicer ~~(Or OrcaSlicer)~~ - Install Network Plugin, if prompted - Navigate to 'Device' tab - Select 'No Printer +' and select 'P2S-Root' - When prompted, enter the Access Code, which can be found via the control panel of the printer on the main settings page. - Return to the 'Prepare' tab, ensure all printer settings are correct. - Bed type: Textured PEI - Nozzle: 0.4mm (Hardened Steel) - Flow: Standard - Slice and Print! ### Specs | spec | stat | |:-------------|------------------:| | Build Volume | 256 x 256 x 256mm | | Max Nozzle Temperature | 300° C | | Max Bed Temperature | 110° C | | Active Chamber Heating | N/A | | Build Plate | Textured PEI | | Nozzle Size (Type) | 0.4mm (Hardened Steel)| *** ## Qidi Q1 Pro (@enzi) - owner: @enzi - status: **in service** - print method: USB On loan to the space starting 7/5/26 until further notice! Todo (as of 7/7/26): - lubricate lead screws ### Printing - On any PC, fire up [orcaslicer](https://www.orcaslicer.com) - Load up the Q1 pro preset with the **0.6 nozzle** (as of 7/21) - Slice, export to an exfat/fat32 formatted drive (it's not picky) - Plug in at the top right - Pick your print on the display! ### Notes - Filament loader needs to be changed at some point (it's jammed against the rack right now) - Have experienced some speghettification (as of 7/21) so the bed might need a wash - The rails are very thirsty for lube... ### Specs | spec | stat | |:-------------|------------------:| | Build Volume | 245 x 245 x 245mm | | Max Nozzle Temperature | 370° C | | Max Bed Temperature | 120° C | | Active Chamber Heating | 60° C | | Build Plate | Textured PEI | | Nozzle Size (Type) | 0.6mm (Unknown)| *** ## VzBoT-330 (@lily) - owner: @lily - status: out of service - print method: none Cool Description