Differences

This shows you the differences between two versions of the page.

--- infrastructure:audio-setup [2025/12/31 03:02] – diamond
+++ infrastructure:audio-setup [2025/12/31 13:08] (current) – bluetooth instructions clarification diamond
@@ Line 13: / Line 13: @@
 ### Connecting to Bluetooth
-We use a "UGREEN-BT505" as the Bluetooth receiver. To enter pairing mode, double-tap the top button. **The LED light should be flashing red and blue.** You should be able to find a Bluetooth device with this name after that.
+We use a "UGREEN-BT505" as the Bluetooth receiver. Its controls are as following:
-This Bluetooth receiver can connect up to 2 devices simultaneously. If you're having issues with connecting to it, you might want to make sure that no one is connected to it. You can check by shutting off the receiver (hit the top button once), turning it back on again, then retry.
+- To turn it on, tap the top button. The LED light should come up. You'll also hear it saying "Powered on."
+- To turn it off, tap the top button again.
+- To enter pairing mode, double-tap the top button. **The LED light should be flashing red and blue.** You should be able to find a Bluetooth device with this name after that.
+This Bluetooth receiver can connect up to 2 devices simultaneously. If you're having issues with connecting to it, you might want to make sure that no one is connected to it. You can ensure this by restarting the Bluetooth receiver.
 ## Wiring