**This is an old revision of the document!**
3D Printers
Prusa i3 MK3 (@???)
- owner: @hadn69
- status: out of service
- print method: octoprint (octoprint is currently oos)
Specs
| spec | stat |
|---|---|
| Build Volume | 250 x 210 x 200mm |
| Max Nozzle Temperature | 300° C |
| Max Bed Temperature | 100° C |
last checked 7/7/26 needs nozzle/bed calibration, should be otherwise good to go?
Bambu P2S (@lily)
- owner: @lily
- status: in service
- print method: Studio PC (BambuSlicer), any PC (Orca/BambuSlicer)
Printing
- Open OrcaSlicer (Or BambuSlicer)
- Install Network Plugin, if prompted
- Navigate to 'Device' tab
- Select 'No Printer +' and select 'P2S-Root'
- When prompted, enter the Access Code, which can be found via the control panel of the printer on the main settings page.
- Return to the 'Prepare' tab, ensure all printer settings are correct.
- Bed type: Textured PEI
- Nozzle: 0.4mm (Hardened Steel)
- Flow: Standard
- Slice and Print!
Specs
| spec | stat |
|---|---|
| Build Volume | 256 x 256 x 256mm |
| Max Nozzle Temperature | 300° C |
| Max Bed Temperature | 110° C |
| Active Chamber Heating | N/A |
| Build Plate | Textured PEI |
| Nozzle Size (Type) | 0.4mm (Hardened Steel) |
Qidi Q1 Pro (@enzi)
- owner: @enzi
- status: in service
- print method: USB
On loan to the space starting 7/5/26 until further notice!
Todo (as of 7/7/26):
- lubricate lead screws
Printing
- On any PC, fire up orcaslicer
- Load up the Q1 pro preset with the 0.6 nozzle (as of 7/21)
- Slice, export to an exfat/fat32 formatted drive (it's not picky)
- Plug in at the top right
- Pick your print on the display!
Notes
- Filament loader needs to be changed at some point (it's jammed against the rack right now)
- Have experienced some speghettification (as of 7/21) so the bed might need a wash
- The rails are very thirsty for lube…
Specs
| spec | stat |
|---|---|
| Build Volume | 245 x 245 x 245mm |
| Max Nozzle Temperature | 370° C |
| Max Bed Temperature | 120° C |
| Active Chamber Heating | 60° C |
| Build Plate | Textured PEI |
| Nozzle Size (Type) | 0.6mm (Unknown) |
VzBoT-330 (@lily)
- owner: @lily
- status: out of service
- print method: none
Cool Description